HS-300BIO BASIC Organic Soil Conditioner Native Humic Acid Suspension

CATALOGUE

CERTIFICATES & REGISTRATIONS

SAFETY DATA SHEET

LABELS

HS®-300BIO BASIC Brochure

HS®-300BIO BASIC ECOCERT NOP Certificate

HS®-300BIO BASIC ECOCERT EU Certificate

HS®-300BIO BASIC FiBL Certificate

HS®-300BIO BASIC Safety Data Sheet

HS®-300BIO BASIC Front label

HS®-300BIO BASIC is a liquid soil conditioner based on high quality micronized German Leonardite that contains a high proportion of humic substances. Produced via a mechanical micronizing process, the humic particles (< 5 μm) are held in aqueous suspension. As a result, the humic acids remain as humic substances molecules, which endure in the soil for a longer period, raising organic matter levels over time.

HS®-300BIO BASIC improves the structure, the buffer capacity and nutrient exchange capacity of soils. It has a low precipitation reactivity and a low pH–value of 4 which allows for good compatibility with most pesticides and fertilizers. (Pre–mixing test advised).

HS®-300BIO BASIC stimulates root growth in soils and sustainably improves the soil structure. It can be applied in fertigation and hydroponic systems or sprayed using conventional foliar or sprinkler techniques.

BENEFITS & RECOMMENDED APPLICATION

Supports the formation of clay–humus complexes and soil aggregation and reduces soil erosion
Increases the quantity and the quality of yields through the full utilization of potential nutrients in the soil
It has a very high technical and chemical compatibility with liquid fertilizers and plant protective agents (pre–mixing test advised)
Increases the biological activity and cation exchange capacity (CEC) in soils
Increases biomass production and stimulates CO2 sequestration in soils

FIELDS OF APPLICATION

Agriculture
Vegetable Production
Fruit Production
Substrate Cultivation
Hydroponics
Turf grass and Landscaping
Seed Treatment

RECOMMENDED APPLICATION RATES *

Soil
3 – 8 L/ha or didived into several applications (1 – 2 L/ha/ha) during vegetation period

Foliar
50 – 75 ml/100 L water every 2 – 3 weeks over the vegetation period

Substrates
0.3 – 0.5 L/m³

Seeds
0.5 % or 500 mL/100 kg seed dressing according to thousand grain weight (T.G.W.)

Hydroponics
30 – 50 ml/1000 L nutrient solution during the cultivation cycle

* Standard recommendations that can vary according to soil properties, cultivated crop and local application conditions.

SHAKE WELL BEFORE USE

Please remind to shake well the bottle or container prepared mix well before use.

BLEND USE NOTICE

Before use in combination with other agents, first preparation of a sample mix in a small scale is recommended to avoid any risk of flocculation.

PREPARATION OF MIXTURE

Make sure sufficient amount of solution is added to half water filled tank while agitator is running. Add additional substances or crop protection agents before filling the tank fully with water.

INHERENT COMPOSITION (Typical values based on Fresh Matter)


Total Humic Acids ^1/2	28 %
Humic Acid ¹	24 %
Humic Acid ²	17 - 18 %
Fulvic Acid ²	4 - 5 %
Dry Matter	27 - 30 %
Organic Matter	28 %
pH	3.5 - 4.5
Density	1.13 g/cm³
Particle Sizes	< 5 μm

Total Humic Acids ^1/2

28 %

Humic Acid ¹

24 %

Humic Acid ²

17 - 18 %

Fulvic Acid ²

4 - 5 %

Dry Matter

27 - 30 %

Organic Matter

28 %

3.5 - 4.5

Density

1.13 g/cm³

Particle Sizes

< 5 μm

1 according to CDFA
²according to ISO 19822 / HPTA / AAPFCO / IHSS Analysis method

“All Humintech humic substances based products are analysed according to the HPTA test method (ISO 19822:2018) to determine the content of humic and hydrophobic fulvic acids. Most suppliers are using the more simple “colorimetric” analysis method to determine the humic and fulvic acid contents, but experience shows that, due to its inaccuracy, this method indicates higher contents and is not suited to identify non humic substances such as lignosulphonates. In order to maintain the highest quality standard, Humintech has therefore decided to use the currently best analytical standard for the determination of humic and fulvic acids within the scope of quality control.”

CONDITIONS FOR SAFE HANDLING AND STORAGE

Store in a dry area, protected from frost, heat and direct sunlight between +5 °C and +25 °C degrees. Can be stored up to 2 years in its original packaging. KEEP CONTAINER CLOSED DURING STORAGE! KEEP OUT OF THE REACH OF CHILDREN, PETS AND FOOD.

DELIVERY SPECS